T100MD888+ 
with built-in 14-pin LCD Interface for 1x8, 2x16.... 4x20 LCD Module

t100md888.jpg (31179 bytes)
  • Analogue I/O
    - 6 x AI -10 bit, 0-5V
    - 2 x AO - 8 bits, 0-5V

  • Digital Outputs
    - includes 2 x PWM 10A @24VDC,
    - include 2 x stepper motor pulse outputs
  • Digital Inputs (24V NPN)
    - include special inputs such as
    interrupts, high-speed encoder, etc.
    -Expandable using EXP4040

  • Dimension: .5.0"(L) x 4.5"(W) x 0.8"(H)

 

View MD888+ hardware manual

T100MD1616+ (with 20mA Analogue output!)  

·         6 Analogue I/O
- 4 x AI - 10 bit 0-1V and 0-5V,
- 2 x AO - 8 bits

·         16 Digital Outputs
- 1A @24VDC each.
-  Include PWM and stepper motor
 controller outputs

·         16 Digital Inputs (24V NPN)
- include special inputs such as
 interrupts, high-speed encoder, etc.

·         Expandable using EXP4040.

·         Dimension: .5.4"(L) x 4.5"(W) x 0.8"(H)

 

View MD1616+ hardware manual

" It was the only units that combined I/O's and A/D with mathematical capabilities as well as a display for that price. .... So far it has been very easy to program and can generate quite powerful programs very quickly "  

Imagine, a very low cost palm size PLC with built-in Liquid Crystal Display (LCD) interface, up to 8 -channel A/D Converters (10-bit precision)), 2-Channel D/A converter (8-bit precision), 2-channel Stepper Motor Controllers, 2-channel Pulse Width Modulated outputs (with 10A output on T100MD888+), 4-channel interrupts, 2-channel encoder inputs, 2-channel frequency measurement inputs, Real-Time Clock, 2 independent communication ports (1 RS232   & 1 RS485 network port) that understand MODBUS RTU & ASCII protocols (baud rate from 110 to 500Kbps, programmable comm. format), 24V NPN Digital Inputs and 24V high current Digital Outputs, expandable to 96 inputs and 96 outputs

The T100MD+ PLC’s are incredible value! The arsenal of built-in hardware makes them suitable to tackle the most difficult tasks with great ease. The followings are just a glimpse of its vast capabilities:

·         Digital Inputs (24V DC NPN transistor) - 8 or 16, expandable to 96 inputs (max)

·         Digital Outputs (24V, 1A DC MOSFET and Darlington) - 8 or 16, expandable to 96 outputs (max)

·         10-bit Analogue inputs - 4 or 8 channels.

·         8-bit Analogue Outputs - 2 channels.

·         Pulse Width Modulated (PWM) Outputs x 2

·         Interrupt Inputs x 4

·         Motion Controller for Stepper Motors (up to 10,000pps per channel) - Support for absolute positioning or incremental move commands. X 2

·         High Speed Counter Inputs with Automatic Quadrature Signal Decoding x 2

·         Real Time Clock and Calendar - Year (Y2K compliant), Month, Day, Day of Week, Hours, Minutes, Seconds. (Optional battery backup module MX-RTC ensure clock runs even when power off)

·         1 RS232 and 1 RS485 ports - Networkable with other PLC’s using simple built-in commands.

·         Built-in PID Computation loops.

·         64 Timers (1-9999 in 0.01 or 0.1s time base)

·         64 Counters (1-9999)

·         256 Internal Relays,

·         6016 Words of EEPROM Program memory.

·         1700 Words of User EEPROM Data memory

·         4000 Words (16-bit) of User RAM memory

·         Dimension: .5.4"(L) x 4.5"(W) x 0.8"(H)

Optional Peripherals

MD-EXP4040 - Expansion Module that adds 40 digital inputs and 40 digital outputs to the basic T100MD888+ or T100MD1616+: 

exp4040nail.jpg (8371 bytes)

Additional I/Os:

a) 24 High Voltage NPN inputs   (24VDC)
    + 16 TTL level inputs (5V active low)

b) 24 High Voltage NPN Outputs (24V 1A DC)
    + 16 TTL Level outputs (5V active high)

Same size as T100MD1616+ - allowing stacking
up and occupying very small footprint. 
  •  MX-RTC - Battery-backed Real Timer Clock Module keeps the clock running even when power to PLC is turned OFF.   With this module all internal RAM data can be configured as non-volatile.

mxrtc.jpg (3330 bytes)

 

·         LCD216 - 2 lines x 16 characters STN LCD Display module with yellow-green LED backlighting.

(Includes cable and backlight current control element)

LCD216.jpg (5093 bytes)

 
  • LCD420 - 4 lines x 20 characters STN LCD Display module with yellow-green LED backlighting (Includes cable and backlight current control element).

LCD420.jpg (4920 bytes)

 
       

In 2001, we have introduced the first PLC software in the world that allows you to remotely program / monitor / control via the Internet using only a web browser!  The Internet TRiLOGI version 5.0 normally works like any other Windows based program, which lets you to program the PLC using a single PC connected to it via the RS232 port. However, because of its client/server-based architecture, you can also program the PLC from other computers on a corporate LAN or any computers on the Internet using a Java web browser. No additional training is required for user to program the PLC via the Internet because they are using the same Window based programming software that they have already mastered during programming in local mode.  


Benefits of Internet Connectivity

1.      Remote monitoring, control or updating of PLC programs from anywhere using a web browser. (Username and password access requirements protect the system from unauthorized access)

2.      EMAIL: PLC can automatically send Emails to users upon event occurrence or can be programmed to periodically send production reports, etc.

3.      Excel Link: Automatic linking of data from multiple PLC’s located at multiple sites around the world into an Excel spreadsheet for instant computation of real time process or production data. (Require purchase of TRi-ExcelLink version 1.0 software)

Supports Multiple Communication Protocols

1.       Supports MODBUS protocols. PLC can act either as Modbus slave or Modbus Master.

2.       Supports OMRON C20H PLC protocols. PLC can act either as slave or master.

3.       Supports a proprietary set of ASCII based Host Link commands that allows remote programming or monitoring by MODEM. Password protection allows device to be left unattended at remote location but accessible by dial-in modem.

4.       Compatible with emWare Inc's redball.gif (599 bytes)EMIT 3.0, which provides user-interface via the Internet.

All the above protocols are supported on both the RS232 port and the RS485 port, enabling either point-to-point or multi-drop connections.  From a single client PC, a programmer can remotely program or monitor any  (theoretical max = 256) PLC’s connected to one single server via the RS485 multi-drop network, up to a distance of 4000 fts (1200m) and at baud rate of up to 38.4 Kbps!

Flexible Automation Ltd